#Navigate the 3D view
#Moving the camera
| Do this | To |
|---|---|
| Drag | Orbit around the robot |
| Right-drag | Pan |
| Scroll | Zoom in and out |
| Click a part of the robot | Select that link and show it in the Inspector |
| Click empty space | Clear the selection |
Scrolling over the 3D view never scrolls the page around it.
#Camera presets
The bar in the top-left corner of the view has:
- Fit — frame the whole robot from an angle. Use this whenever you lose the robot.
- Front, Right, Top, Iso — look along a fixed direction, still framing the whole robot.
#Display options
Open Display in the same bar:
| Option | What it does |
|---|---|
| Wire | Draw every mesh as a wireframe. Useful for gaps between parts or heavy meshes. |
| Grid | Show the ground grid. |
| Axes | Show the world X (red), Y (green) and Z (blue) axes at the origin. |
| Frames | Show each link's coordinate frame — see Frames, labels and inertia. |
| Inertia | Show centres of mass and inertia ellipsoids. |
| Self-collision | Highlight links whose collision shapes overlap — see Visual and collision geometry. |
| Labels | Write joint or link names in the 3D view. |
The Visual menu next to the presets switches between visual geometry, collision geometry, or both.
#The robot is lying on its side
ROS uses Z as up, and so does URDF Studio by default. If your model was built for a Y-up tool, change Up axis in the settings — see Packages, xacro args and settings.
#Resizing the side panel
Drag the left edge of the side panel. With the edge focused, the ← and → keys resize it in steps and Home resets it. The width is remembered.
#The caption in the corner
The small caption at the bottom-left of the view shows what is happening — parsing, loading meshes — and then the robot's name with its link and movable joint counts.