URDF Studio

Search documentation

#Frames, labels and inertia

These overlays live in the Display menu of the 3D view. They help you check that a model is built the way you think it is.

#Coordinate frames

Frames draws a small X/Y/Z axis (red/green/blue) at each link's origin:

Setting Draws frames on
off Nothing (default)
selected The selected link only
all Every link

Use it to check that joint origins sit where they should and that axes point the right way — for example, that a tool frame's Z points out of the flange. selected is the least cluttered: click a link, and its frame appears.

#Labels

Labels writes names into the 3D view: joints, links, or both. Useful on an unfamiliar robot, or to find which link is which when names are long.

#Centre of mass and inertia

Inertia shows how mass is distributed:

  • A marker at each link's centre of mass.
  • An ellipsoid around it, shaped by the link's inertia. A long ellipsoid means the link is harder to rotate around its short axes.
  • A larger marker at the centre of mass of the whole robot.

Links without an <inertial> block are skipped. If an ellipsoid is huge, tiny, or far from its link, the inertia values are probably wrong — Checks flags the clearest cases, such as zero mass or an impossible inertia tensor.

For the numbers themselves, select the link and open the Inspector.