#Inspect a link
#Select a link
Either:
- Click the part in the 3D view, or
- Open the Links tab and click the link's name.
The selected link gets a yellow box around it, and the Inspector tab opens with its details. Click empty space in the 3D view to clear the selection.
#The Links tab
The Links tab shows the robot as a tree: each link sits under the link it is attached to. Hover a row to see the joint that connects it to its parent. The selected link is highlighted.
The tree is a quick structural check. A link that appears at the top level
when it shouldn't usually means a joint names the wrong parent — Checks
reports it as R-001 or R-003.
#What the Inspector shows
| Field | Meaning |
|---|---|
| Link | The link's name |
| Parent | The joint that attaches this link to its parent (none for the root) |
| Type | That joint's type: revolute, prismatic, fixed… or root |
| Axis | The joint axis, in the joint's frame |
| Limit | Lower and upper limit, in radians or metres |
| Mimic | The joint it follows, as joint × multiplier + offset, or none |
| Children | Joints that attach other links to this one |
| Mass | From <inertial><mass>, or n/a if the link has no inertial |
| CoM | Centre of mass, from <inertial><origin xyz> |
| Meshes | Each visual and collision mesh file, marked missing if it can't be found |
#When a mesh is missing
The Inspector still shows the path written in the URDF, and the part is left out of the 3D view. The usual causes are covered in Troubleshooting.
#Jump to the source
When a link is selected, the Source tab highlights the line where it is declared. In VS Code, the text editor jumps there too if the file is open.