#Frames, labels and inertia
These overlays live in the Display menu of the 3D view. They help you check that a model is built the way you think it is.
#Coordinate frames
Frames draws a small X/Y/Z axis (red/green/blue) at each link's origin:
| Setting | Draws frames on |
|---|---|
| off | Nothing (default) |
| selected | The selected link only |
| all | Every link |
Use it to check that joint origins sit where they should and that axes point the right way — for example, that a tool frame's Z points out of the flange. selected is the least cluttered: click a link, and its frame appears.
#Labels
Labels writes names into the 3D view: joints, links, or both. Useful on an unfamiliar robot, or to find which link is which when names are long.
#Centre of mass and inertia
Inertia shows how mass is distributed:
- A marker at each link's centre of mass.
- An ellipsoid around it, shaped by the link's inertia. A long ellipsoid means the link is harder to rotate around its short axes.
- A larger marker at the centre of mass of the whole robot.
Links without an <inertial> block are skipped. If an ellipsoid is huge,
tiny, or far from its link, the inertia values are probably wrong —
Checks flags the clearest cases, such as zero mass or
an impossible inertia tensor.
For the numbers themselves, select the link and open the Inspector.