URDF Studio

Search documentation

#Inspect a link

Either:

  • Click the part in the 3D view, or
  • Open the Links tab and click the link's name.

The selected link gets a yellow box around it, and the Inspector tab opens with its details. Click empty space in the 3D view to clear the selection.

The Links tab shows the robot as a tree: each link sits under the link it is attached to. Hover a row to see the joint that connects it to its parent. The selected link is highlighted.

The tree is a quick structural check. A link that appears at the top level when it shouldn't usually means a joint names the wrong parent — Checks reports it as R-001 or R-003.

#What the Inspector shows

Field Meaning
Link The link's name
Parent The joint that attaches this link to its parent (none for the root)
Type That joint's type: revolute, prismatic, fixed… or root
Axis The joint axis, in the joint's frame
Limit Lower and upper limit, in radians or metres
Mimic The joint it follows, as joint × multiplier + offset, or none
Children Joints that attach other links to this one
Mass From <inertial><mass>, or n/a if the link has no inertial
CoM Centre of mass, from <inertial><origin xyz>
Meshes Each visual and collision mesh file, marked missing if it can't be found

#When a mesh is missing

The Inspector still shows the path written in the URDF, and the part is left out of the 3D view. The usual causes are covered in Troubleshooting.

#Jump to the source

When a link is selected, the Source tab highlights the line where it is declared. In VS Code, the text editor jumps there too if the file is open.